Swimming Pool Filters Einkaufsführer


Swimming Pool Filters Einkaufsführer

Beim Kauf eines Schwimmbadfilters ist Ihre wichtigste Entscheidung die Bestimmung des richtigen Filtertyps. Dieser sachkundige Führer hilft.

Es gibt verschiedene Arten von Schwimmbadfiltern zur Auswahl. Hier eine Einführung in die drei gebräuchlichsten Typen:

Cartridge Pool Filter

Ein Patronenfilter ist die häufigste Wahl für ein Wohnschwimmbad. Es wird Partikel bis zu 5 Mikron herausfiltern. (Das kleinste für das menschliche Auge sichtbare Partikel ist 35 Mikron.) Wenn Sie das Gefühl haben, dass Sie noch kleinere Partikel herausfiltern müssen, oder wenn Ihr Pool für öffentliche Zwecke verwendet wird und daher strengen Codes unterliegt, wählen Sie stattdessen eine Diatomeenerde. Filter oder ein Sandfilter.

Kassetten-Poolfilter

Ein Kassettenfilter ist kostengünstiger als ein DE-Filter, kostet aber etwas mehr als ein Sandfilter. Patronenfilter sind am einfachsten zu warten und bei der Reinigung wird viel weniger Wasser verbraucht, als für die Reinigung der beiden anderen Typen erforderlich ist. Ein Patronenfilter benötigt auch weniger Wasserdruck als ein DE- oder Sandfilter, so dass die Pumpe weniger belastet wird.

Ein typischer Patronenfilter beherbergt drei oder vier Filterpatronen. Die Patronen bestehen in der Regel aus Papier oder Polyester, das dicht gewebt ist, um alle bis auf die feinsten Schmutzpartikel herauszufiltern. Die Partikel sind in den Patronen eingeschlossen; Nach einiger Zeit verstopfen die Patronen und müssen gereinigt oder ersetzt werden.

Typischerweise sollten Patronen etwa zweimal pro Saison entfernt und gereinigt werden, indem einfach ein Schlauch auf sie gerichtet wird. Wenn das nicht ausreichend funktioniert, versuchen Sie es mit einem milden Reinigungsmittel und spülen Sie dann gründlich nach. Oder tauschen Sie einfach die Patronen aus.

Filter für Diatomeenerde (DE)

Von den drei Arten von Schwimmbadfiltern erfassen Diatomeenerde-Poolfilter die feinsten Partikel - bis zu 3 Mikron.

Der meistverkaufte DE-Filter bietet eine Filterfläche von 48 Quadratmetern.

Wasser gelangt in den Boden des Filters und wird durch eine Reihe von Gittern nach oben geschoben, von denen jedes mit Diatomeenerde überzogen ist, einem extrem feinen Pulver, das tatsächlich aus versteinertem Plankton besteht.

Obwohl es der effektivste Poolfilter ist, gibt es mehrere Gründe dafür, dass er keine beliebte Wahl für einen Wohnpool ist. Es ist das teuerste und erfordert auch viel mehr Wartung als ein Patronenfilter.

Um den Filter zu reinigen, müssen Sie den Wasserfluss umkehren, um den Filter rückspülen zu können, und dann das schmutzige Wasser ablaufen lassen.

Leider müssen Sie dafür etwa 500 Gallonen Wasser verwenden, und die ausgewaschene Kieselgur ist ein gefährliches Material, das gemäß den Vorschriften entsorgt werden muss. Außerdem denken viele Experten, dass Rückspülen nicht gut genug ist, dass die Gitter einzeln entfernt und gereinigt werden sollten.

Sand Pool Filter

Sand Filter für Pool

Sandfilter, auch Hochgeschwindigkeits-Sandfilter genannt, waren einst der häufigste Typ.Sandfilter sind größer als Patronenfilter und Diatomeenerdefilter, da sie 200 oder mehr Pfund Schwimmbadesiebsand enthalten müssen. Sie sind die am wenigsten wirksame Art von Filter und entfernen Partikel, die nur etwa 25 Mikrometer groß sind. Dennoch, wenn Sie bereits einen Sandfilter haben, wird er Ihren Pool sauber halten.

Der Tank, der aus Metall oder Kunststoff bestehen kann, steht unter Druck. Wasser tritt nahe der Spitze ein, wird kraftvoll durch den Sand gesprüht und tritt nahe dem Boden aus. Der Sand fängt die Partikel ein.

Der Hauptnachteil ist der schwere Wartungsplan: Ein Sandfilter muss einmal pro Woche oder so gewaschen werden. Sie müssen den Wasserfluss umkehren, um den Sand rückspülen zu können. Auf diese Weise verschwenden Sie etwa 500 Gallonen Wasser.

Weiter zu:

Schwimmbadpumpen Ratgeber

Schwimmbadheizungen Ratgeber

Swimming Pool Filters Einkaufsführer

FAQ - 💬

❓ How do I know what filter to buy for my pool?

👉 Filter Size The filter flow rate must be rated at least the same GPM as your pump, or higher. With pool filters, it's best to err on the larger size so it can handle the power of your pump. A helpful rule of thumb is to choose a filter with at least 1 square foot per 10,000 gallons pool capacity.

❓ What is the difference between Type A and Type C pool filters?

👉 The only difference between a type A and Type C is the internal diameter of the filter. The A/C Filter type is a hybrid which has an internal rim with a 1-3/4" internal diameter which will deform to 2" if the pump really needs an A filter.

❓ How long should a pool filter last?

👉 Pool filter cartridges can run for about 2,000 hours in a filter pump and should be replaced every 1-2 years. Note that the filter cartridge will not last as long due to sunscreen, deodorants, hair care products, and other chemicals that come into contact with your pool water.

❓ What size sand filter do I need for a 1.5 HP pump?

👉 Filter Sizing Chart #2

Pool GallonagePump SizeRecommended Filter Size
15,0001.0 hpCartridge - 100-200 Sq. Ft. Sand - 3.0 Sq. Ft DE - 36 Sq Ft
20,0001.5 hpCartridge - 300-400 Sq. Ft. Sand - 3.9 Sq. Ft DE - 48 Sq Ft
25,0001.5 hp
30,0002.0 hpCartridge - 400-500 Sq. Ft. Sand - 4.9 Sq. Ft DE - 60 Sq Ft

❓ Which is better a sand or cartridge pool filter?

👉 If you are looking for a highly efficient solution with the least amount of bacteria and debris left swimming around in your pool, the cartridge filter is your best solution. The cartridge filter can catch finer debris than a sand filter, being 10-20 microns versus 20-40 microns.

❓ Can a pool filter be too big?

👉 Selecting a small one for a large pool will require frequent filter replacements and might even break down under pressure, while the one that is too big will work too quickly and powerfully, and might make the pool unsafe. Therefore, it is essential to size the filter properly.

❓ What size is a Type C pool filter?

👉 4.13 in. x 8 in.x 8 in. Replacement Pool Filter Cartridge (4 Pack)

❓ What size is a type B pool filter?

👉 5.75 x 10 inchesSize: 5.75 x 10 inches. HIGH QUALITY FILTER CARTRIDGE: Keep your pool water crystal clear and give your swimming pool pump its best performance with the filter Cartridge Type B.

❓ How do I know if my pool filter is bad?

👉 How Do I Know If My Pool Filter is Bad?

  1. The water turns cloudy.
  2. Leaking multi-port valves,
  3. Broken or bad laterals,
  4. Valve failure,
  5. Tank failure, and.
  6. Pressure issues.

❓ How often should you rinse your pool filter?

👉 How often does my filter need cleaning? A pool needs a clean filter and it needs to be cleaned periodically-usually once a month in swim season and perhaps less frequently in the offseason. If your pool's filter is oversized by design, these filters need cleaning 3-4 times per year by a pool professional.

❓ What is the easiest pool filter to maintain?

👉 Sand filtersMaintenance: Sand filters are considered to be the easiest to maintain. Sand filters are backwashed when the pressure reads 10 psi over the normal operating level. With proper water chemistry, you can expect your filter media to last 5-10 years.

❓ What is a filtration in a pool?

👉 Filters are universal in pool systems, linked to the circulation system along with the motors and pumps. As water pumps through the circulation system of a pool or spa, impurities are strained by a filter. The filter itself has no moving parts and is made of simple components.

❓ Are cartridge pool filters better than de?

👉 This cartridge pool filter is often favorably compared to DE pool filters, but without the multi-step care and maintenance that DE systems require. The result is clear, sparkling water with less work.

❓ How do you add de to a pool filter?

👉 The DE should be mixed with water and fed into the filter as a “slurry,” or suspended mixture. After turning on the circulation system, add the slurry via the skimmer at as steady a rate as possible to permit even coating of the filter septa.

❓ What is a pool filter line?

👉 The plumbing line that leads from the pool or spa to the filter equipment. Also known as the suction line. A valve that permits the multi-directional control of the flow of water through a filter; it combines the function of two or more single valves. The difference in pressure between the influent and effluent lines of a filter.


Autor Des Artikels: Alexander Schulz. Unabhängiger Konstrukteur und technischer Experte. Arbeitserfahrung in der Baubranche seit 1980. Fachkompetenz in den Richtungen: Bau, Architektur, Design, Hausbau.

Video-Anleitung: Pool filter psi: high and low filter pressure - causes and cures.


Teilen Sie Mit Ihren Freunden
Kommentar Hinzufügen