Einige Tipps Und Tricks Für Cabinet Refacers


Einige Tipps Und Tricks Für Cabinet Refacers

Bereit für deinen Umbau? Hier finden Sie einige Tipps und Tricks für Cabinet Refacers:

  • Kaufen Sie selbst Materialien: Selbst wenn Sie die Arbeit austragen, können Sie die Materialien oft selbst kaufen, um Geld zu sparen. Bei einem Einkauf sind Sie in einer besseren Position, um zu wissen, wie hoch der Preis ist, damit Sie ihn mit den Angeboten vergleichen können.
  • Ziehen Sie die Schränke von der Wand: Das Schleifen, Auftragen von Furnier und die Endbearbeitung kann ein wenig mehr Kopfschmerzen verursachen, wenn die Schränke noch an der Wand befestigt sind. Ziehen Sie sie weg, um Ihre Zeit zu beschleunigen und sich selbst zu erleichtern.
  • Verwenden Sie die richtigen Lösungsmittel: Bevor Sie das alte Finish abziehen, stellen Sie sicher, dass Sie wissen, welche Art von Finish es ist, weil verschiedene Lösungsmittel mit verschiedenen Oberflächen arbeiten. Auch kann ein Semipasten- oder Gel-Lösungsmittel verwendet werden, um unordentliche Tropfen zu minimieren.
  • Wählen Sie das richtige Furnier: Berücksichtigen Sie die Dicke des Furniers für verschiedene Projekte. Ein- und zweilagiges Holzfurnier lässt sich besser biegen. Wenn Sie Kurven oder andere unpassende Formen haben, sollte dies einfacher zu verarbeiten sein. Wenn Sie jedoch alle geraden Oberflächen haben und Material anbringen wollen, das viel Verschleiß aushält, sollten Sie eine dickere Drei- oder Vierschicht verwenden.
  • Hardware erneut verwenden: Möglicherweise müssen Sie Ihre Hardware nicht ersetzen. Manchmal braucht es nur ein paar Reinigungs- und Polierarbeiten. Weichen Sie alle Ihre Hardware in heißem Wasser gemischt mit einem normalen Geschirrspülmittel für etwa anderthalb Stunden. Nachdem es getrocknet ist, reinigen Sie es erneut mit der entsprechenden Politur.
  • Vorgefertigte Türen kaufen: Vorgefertigte Schranktüren ermöglichen es Ihnen, sich etwas vom Projekt abzukoppeln und sicherzustellen, dass das offensichtlichste Merkmal professionell aussieht.

Dies sind nur ein paar Tricks für selbstgebaute Cabinet Refacers. Sogar eine kleine Handvoll Geheimtipps kann den Job exponentiell erleichtern.

Einige Tipps Und Tricks Für Cabinet Refacers

FAQ - 💬

❓ Is it cheaper to paint or replace kitchen cabinets?

👉 It's always less expensive if you apply new paint instead of replacing or resurfacing. Let's look at some of the reasons you might consider repainting your kitchen cabinets. Typically homeowners consider repainting cabinets because they are outdated and ready for a new look.

❓ Can you resurface laminate kitchen cabinets?

👉 So long as your laminate cabinets aren't falling apart, they can be refaced just as well as any other cabinet. “The wood my cabinets are made from is soft/low quality, can it be refaced?” For a cabinet to be refaced, it must be possible to clean and sand the surface of the cabinet, producing a smooth, firm surface.

❓ Can I reface cabinets myself?

👉 Simply put, refacing kitchen cabinets can be done by the following: Remove the doors and drawers of each cabinet. Cover the front edges of the cabinets with peel and stick wood veneer. Hang the new cabinet doors with easy-to-install cup hinges.

❓ What are options for refacing cabinets?

👉 6 Top Styles for Kitchen Cabinet Refacing

  • Traditional. Traditional cabinet doors use raised-panel construction to achieve their decorative profiles and contours. ...
  • Shaker. Shaker-style cabinet doors have taken off in recent years. ...
  • Beadboard. ...
  • Flat-Front. ...
  • Glass-Front. ...
  • Rustic.

❓ How much should I pay to have my kitchen cabinets painted?

👉 It costs $3 to $10 per square foot to paint kitchen cabinets, or an average of $30 to $60 per linear foot, including labor, materials, and supplies. This does depend on the condition of the cabinets and how much work is needed to remove doors and hardware.

❓ What kitchen cabinets Cannot be painted?

👉 Cabinets that aren't solid wood—those made of stainless steel, vinyl, laminate, engineered wood, or any other non-solid wood material—are a much bigger task to undertake as they aren't as easy to paint. Paint will not adhere to the finished cabinet surface easily and will often peel off or chip.

❓ How can I update my laminate cabinets without replacing them?

👉 0:081:394 Ways to Update Kitchen Cabinets Without Replacing Them (Part 1YouTube

❓ How can I make my laminate cabinets look better?

👉 Painting is the easiest way to change the look of laminate cabinets. However, because the surface is slick, you can't just paint them the way that you would wood cabinets. To help the paint adhere to the laminate, the surface must be scuffed slightly with sandpaper, says Bob Vila.

❓ How do I make my kitchen cabinets look new?

👉 25 Easy Ways to Upgrade Basic Kitchen Cabinets

  1. Try Removable Wallpaper. ...
  2. Swap Out Boring Hardware. ...
  3. Install Sliding Shelves. ...
  4. Get Organized With Drawer Dividers. ...
  5. Hang Storage Bars Inside Doors. ...
  6. Add Interest With Furniture Legs & Feet. ...
  7. Try Open Shelving. ...
  8. Add Toe Kick Drawers.

❓ Is it better to reface or paint cabinets?

👉 Either way, both choices give you a less expensive option in lieu of doing a full replacement, which is great for any homeowner on a budget. While painting tends to be the cheaper of the two, painted cabinets build up grease and dust more easily than refaced cabinets, so they'll require more maintenance.

❓ Is it worth it to reface kitchen cabinets?

👉 Cabinet refacing can be a good, cost-saving option for kitchen remodeling if the existing cabinets are well-constructed and in good shape, and where a radically different look is desired. It is also a good choice where the existing kitchen layout works well as it is.

❓ How to reface kitchen cabinets?

👉 In a nutshell, here’s how to reface cabinets: 1 Remove the doors and drawers and cover the front edges of the cabinets with peel-and-stick wood veneer. 2 Hang the new doors with easy-to-adjust, easy-to-install cup hinges. 3 Attach new drawer fronts to your existing drawers. Finish up by replacing moldings and installing new hardware.

❓ Why outsource cabinet refacing with walzcraft?

👉 For more than 35 years, Cabinet Refacers across North America have been outsourcing Custom Cabinet Doors, Veneers, Wood Moldings, and other cabinet components from WalzCraft to obtain the highest level of quality products exclusively designed for Cabinet Refacing.

❓ What is involved in cabinet door refacing?

👉 While it’s optional, most cabinet door refacing projects also include a new cove molding at the top of the cabinets and a thin layer of matching plywood to cover the cabinet toe-kick. We ordered doors, drawer fronts, veneer, plywood and moldings prefinished from the manufacturer, but our supplier only sells to professionals.

❓ What tools do you need to reface cabinets?

👉 Refacing cabinets does require attention to detail and some experience working with tools, but you don’t have to be a master carpenter. If you can measure and cut accurately, you shouldn’t have any trouble. We use a Virutex laminate slitter to cut strips of veneer.


Autor Des Artikels: Alexander Schulz. Unabhängiger Konstrukteur und technischer Experte. Arbeitserfahrung in der Baubranche seit 1980. Fachkompetenz in den Richtungen: Bau, Architektur, Design, Hausbau.

Video-Anleitung: Budget Kitchen Renovation & Cabinet Refacing.


Teilen Sie Mit Ihren Freunden
Kommentar Hinzufügen