How to Installieren Radiant Barrier Foil Insulation


How to Installieren Radiant Barrier Foil Insulation

Eine der einfachsten und kostengünstigsten Möglichkeiten, um Ihre Energiekosten zu senken und Ihr Haus im Sommer zu kühlen, ist die Installation eines Folie Strahlungsisolierung in Ihrem Dachboden.

Die Wärmedämmschicht ist ein folienartiges Material, das in großen Rollen verkauft wird.

Wie im Insulation Buying Guide beschrieben, besteht die Dämmung der Strahlungsbarrierenfolie aus einem dünnen Blech aus Aluminium oder einem anderen reflektierenden Material, das über die Dachbodenisolierung gelegt oder an den Dachsparren befestigt ist. Entworfen, um die Wärme zu reflektieren, die von einem Dach an heißen, sonnigen Tagen absorbiert wird, hält die Strahlungsbarrierefolie den Dachbodenluftkühler und reduziert dadurch die Wärmemenge, die auf die Wohnräume darunter übertragen wird.

Folienisolieranlage

Bei einem bestehenden Dachboden können Sie entweder Folienfolien-Wärmedämmfolien auf die Sparren klammern oder die Folie auf die Isolierung legen. Das Anbringen einer Strahlungsbarrierenisolierung an den Sparren ist die effektivste Methode, die verwendet wird, aber beide Verfahren haben ihre Vor- und Nachteile.

Das Verlegen der Strahlungsbarriere auf Dachbodenisolierung ist der einfachste Weg, um es zu installieren, aber es ist wahrscheinlicher, dass es auf diese Weise staubig wird, und das Department of Energy schätzt, dass, da eine Strahlungsbarriere Staub ansammelt, die Effizienz kann um bis zu 50% gesenkt werden. Es macht auch die Navigation im Dachboden gefährlicher, da Sie nicht leicht erkennen können, wo sich die Dachbalken befinden. Außerdem kann Wasserdampf an der Unterseite kondensieren und die Isolierung dämpfen, wodurch ihre Wirksamkeit verringert und Schimmelwachstum gefördert wird. Wenn Sie sich für eine Dachbodeninstallation entscheiden, achten Sie darauf, eine Strahlungsbarriere zu erwerben, die die Verdunstung von Feuchtigkeit ermöglicht.

Die Befestigung der Folien-Dämmschicht an der Unterseite des Daches ermöglicht eine bessere Belüftung des Dachgeschosses - reduzierte Wärmeentwicklung im Sommer und die Entfernung schädlicher Feuchtigkeit im Winter - und verdeckt nicht die Lage der Balken. Es kann jedoch die Lebensdauer von Asphaltschindeln auf Ihrem Dach reduzieren (da die Hitze reflektiert wird, können Schindeln bis zu 10 Grad heißer werden als normalerweise). Sie benötigen mehr Zeit für eine Dachsparreninstallation als für eine Dachbodeninstallation, da es schwieriger ist, als nur eine Strahlungsbarriere über die Isolierung zu legen; Außerdem benötigen Sie mehr Materialien, da die Fläche eines Schrägdachs größer ist als die des Fußbodens.

Richtige Installationstipps

Achten Sie bei der Installation darauf, dass das reflektierende Material nach oben zeigt, damit die Wärme vom Haus weggeleitet wird. Für Ihren eigenen Komfort und Sicherheit, versuchen Sie es zu vermeiden, es in der Mitte des Sommers zu installieren, wenn Ihr Dachboden am heißesten ist. Außerdem wird es mit einem Helfer einfacher, eine relativ einfache Aufgabe zu erledigen. Achten Sie darauf, die Lüftungsschlitze oder die Beleuchtung nicht zu verdecken, und achten Sie darauf, dass Sie keine elektrischen Leitungen verlegen.

Tragen Sie Schutzkleidung, eine Staubmaske und eine Schutzausrüstung auf Ihrem Kopf, da die Nägel manchmal durch die Dachabdeckung stoßen. Wenn Ihr Dachboden unvollendet ist, verwenden Sie ein Stück Sperrholz, das auf die Dachbalken gelegt wurde, um Ihr Gewicht zu verteilen und Ihnen beim Navigieren zu helfen. Andernfalls könnte ein falscher Schritt dazu führen, dass Sie durch die darunter liegende Decke stürzen.

Die Kosten für die Installation einer Strahlungsbarriere hängen von der Art der Isolierung, der Art der von Ihnen gewählten Strahlungsbarriere und davon ab, ob Sie einen Auftragnehmer beauftragen, dies selbst zu tun. Achten Sie beim Kauf der Schranke selbst darauf, dass sie von der National Fire Protection Association in Klasse A eingestuft wird, um alle Bauvorschriften einzuhalten. Sie können die Strahlungsbarriere online kaufen.

How to Installieren Radiant Barrier Foil Insulation

FAQ - 💬

❓ How do you install foil radiant barrier?

👉 1:413:11Installing Radiant Barrier with AtticFoilStart of suggested clipEnd of suggested clipSimply make a vertical cut in the foil. And staple around it making sure that it's flush with yourMoreSimply make a vertical cut in the foil. And staple around it making sure that it's flush with your surface.

❓ Which side of foil insulation faces out?

👉 The reflective side of the board should be oriented to the exterior and the nonreflective white side should be oriented to the interior. EXCEPTION: If vinyl siding is to be installed over AP™ Foil-Faced sheathing, install foam boards with the white nonreflective side toward the vinyl siding.

❓ How do you install reflective foil insulation?

👉 0:134:57How To Install Radiant BarrierStart of suggested clipEnd of suggested clipNotice he's leaving a little space at the bottom that's where ventilation to come up from theMoreNotice he's leaving a little space at the bottom that's where ventilation to come up from the soffits. Behind the foil. It.

❓ Can you use aluminum foil as radiant barrier?

👉 Aluminum foil has the radiant barrier properties of high reflectivity and low emissivity. That means the foil reflects much of the roof's heat back upward. The low emissivity property of the foil reduces the amount of heat that the foil radiates on through to the attic insulation below.

❓ How should radiant barrier be installed?

👉 0:364:39How To Install Radiant Barrier AtticFoil - Part 1

❓ Can I install radiant barrier myself?

👉 0:202:31Radiant Barrier Questions - Can I REALLY Install It Myself?

❓ Does foil insulation need an air gap?

👉 You MUST have an air gap in order to get either the emissivity quality or the reflectivity quality that you're looking for, otherwise the foil will not work as a radiant barrier.

❓ Which way should radiant barrier face?

👉 Radiant barriers and reflective insulation systems work by reducing radiant heat gain. To be effective, the reflective surface must face an air space. Dust accumulation on the reflective surface will reduce its reflective capability.

❓ Does aluminum foil reflect radiant heat?

👉 Most aluminum insulation has only a 5% absorption and emissivity ratio. It is impervious to water vapor and convection currents, and reflects 95% of all radiant energy which strikes its air- bound surfaces.

❓ Is foil backed insulation better?

👉 Foil faced insulation is the best type of insulation for retaining heat in the winter and keeping heat out in the summer. This insulation product is designed to slow heat transfer and enhance acoustical performance. It also works as a barrier for methane, radon, vapor, termites and other vermin.

❓ Can you install radiant barrier yourself?

👉 1:102:31Radiant Barrier Questions - Can I REALLY Install It Myself?

❓ How do you install radiant barrier foil in an attic?

👉 For the majority of installations, there are basically two different methods used to install radiant barrier foil in an attic. The first is stapling foil to the bottom of the roof rafters, the second is laying it out over the existing attic ceiling insulation.

❓ How does radiant barrier foil work?

👉 Designed to reflect the heat absorbed by a roof on hot, sunny days, radiant barrier foil keeps he attic air cooler and thereby reduces the amount of heat transferred to the living spaces below. In an existing attic, you can either staple rolls of foil radiant barrier insulation to the rafters or lay the foil out on top of the insulation.

❓ What is the best way to install radiant insulation?

👉 Foil Insulation Installation. Laying the radiant barrier on top of attic floor insulation is the easiest way to install it, but it’s more likely to get dusty that way, and the Department of Energy estimates that, as a radiant barrier accumulates dust, its efficiency can be decreased by up to 50%.

❓ How do I install the Ultima-foil radiant barrier?

👉 Read more about condensation buildup ). Starting at one end of your attic, install our Ultima-FOIL breathable radiant barrier over across attic floor joists, plywood decking or existing insulation. Use a stick (1/4" furring strip with nail in the end works well) to help push the barrier into the tight spaces of your attic.


Autor Des Artikels: Alexander Schulz. Unabhängiger Konstrukteur und technischer Experte. Arbeitserfahrung in der Baubranche seit 1980. Fachkompetenz in den Richtungen: Bau, Architektur, Design, Hausbau.

Video-Anleitung: Radiant barrier installation - how to install radiant barrier.


Teilen Sie Mit Ihren Freunden
Kommentar Hinzufügen