Jetzt Diskutieren
Kiwi - Wachsen

Floor Framing & Structure


Floor Framing & Structure

Ein illustrierter Blick darauf, wie ein typischer Holzrahmenboden gebaut wird, einschließlich Untergrund und mehr

auf einer Betonplatte flach auf dem Boden gebaut, sind die meisten Etagen über dem Boden angehoben. Erhöhte Fußböden sind unter den Füßen widerstandsfähiger und bieten Zugang zu Heizgeräten, Isolierungen, Rohrleitungen, Kabeln und anderen mechanischen Geräten.

Ein Doppelboden ist mit einem Holzrahmen konstruiert, der von einer Außenwand zur anderen überbrückt. Dieser Rahmen kann zwischen Trägern, Balken oder Wänden unterbrochen sein oder nicht.

In den oberen Stockwerken eines Hauses dient die Unterseite der Bodeneinrahmung in der Regel als Rückwand für Deckenmaterialien. Decken werden normalerweise nur wie Böden gebaut, nur können sie aus leichteren Materialien gebaut werden, da sie nicht die gleichen Lasten tragen sollen.

Raised Floor Framing Diagram

Bodenbalken

Ein Bodengerüst besteht meist aus Holzbalken, die in regelmäßigen Abständen parallel zueinander verlaufen. Bodenbalken sind typischerweise 2 mal 8, 2 mal 10 oder 2 mal 12; Deckenbalken sind in der Regel 2 mal 6s oder manchmal 2 mal 4s, wenn es ein älteres Zuhause ist. Einige neuere Häuser haben hergestellt, ich balkenförmige Balken.

In regelmäßigen Abständen angeordnete Bodenbalken überspannen die Bereiche zwischen Trägern wie Wänden, Fundamenten, Trägern und Trägern. Der normale Abstand beträgt 16 Zoll "in der Mitte" (von Mitte zu Mitte), obwohl einige Etagen Träger in 12-Zoll- oder 24-Zoll-Zentren haben können. Balkengröße und Abstand werden durch Bauvorschriften bestimmt, die auf technischen Anforderungen basieren. Joist-Header verlaufen senkrecht zu den Balken und bedecken ihre Enden.

Bodenrahmen für Treppen

Balken werden über Balken oder andere Stützen gespleißt. Sie können Ende an Ende aneinandergelegt und mit Sperrholzplatten verbunden oder geläppt werden. Eine feste Blockierung oder eine Metallüberbrückung verhindert das Verdrehen der Balken und trägt zur gleichmäßigen Verteilung der Lasten bei.

Überall dort, wo eine Öffnung auftritt, wie zum Beispiel bei einer Treppe, werden die Balken am Umfang verdoppelt und mit senkrechten Köpfen verschlossen.

Die Einstiegsplatte

Auf der Gründungsebene liegen die Bodenbalken direkt auf einer Schwelle, die mit Konservierungsmittel behandelt wird, so dass der Kontakt mit dem Fundament keine Termiten oder Fäulnis fördert. Ihre genaue Konstruktion und Verbindung mit den Wandstiften hängt von der verwendeten Rahmenmethode ab.

Der Subfloor

Subflooring ist eine Basis für Fertigfußböden und dient auch als Plattform während der Bauphase. Es kann aus Brettern bestehen, die entweder rechtwinklig oder diagonal über Balken verlegt sind. Oder der Unterboden kann aus Sperrholz oder anderen Plattenerzeugnissen hergestellt sein, die senkrecht zu den Balken verlaufen.

Ein Unterboden aus Sperrholz hat versetzte Platten, deren Enden und Kanten aneinanderstoßen; Die Platten werden an die Balken genagelt (und manchmal auch mit Konstruktionskleber verklebt).

Die Dicke und Steifheit des Unterbodens bestimmen die Arten von Oberflächenmaterialien, die darauf aufgelegt werden können.Wenn Ihr Haus auf einer Betonplatte steht, kann die Platte als Basis für fast jede Art von Bodenbelag dienen. Wenn Ihr Haus jedoch einen Unterboden aus Sperrholz oder Pappe hat, ist es wichtig, die Art und Dicke des Materials, das Sie verwenden möchten, zu überprüfen, um festzustellen, welche Einschränkungen bestehen. Zum Beispiel ist ein Boden, der leicht biegsam oder federnd ist, nicht für starre Materialien wie Keramikfliesen und Stein geeignet, da der Mörtel oder die Materialien bei Bewegung reißen.

Vorgestellte Ressource: Holen Sie sich einen vorab durchsuchten lokalen Framing Contractor

Floor Framing & Structure

FAQ - 💬

❓ What is a floor framing system?

👉 A floor framing system system is what it says on the tin - a set of structural elements that supports a floor. This can be a truss spanning between two walls, a concrete slab supported by columns, a series of 2x6s with wood sheathing on top, or any of a dozen other systems.

❓ What is a floor structure?

👉 The floor structure distributes the load from the walls, upper storeys and roof straight to the building foundations. In the positions of planned load-bearing walls and partitions, the floor structure should be designed to avoid too much of a deflection.

❓ What are the parts of a floor frame?

👉 A stick-framed floor consists of the sill plate, anchor bolts, joists, rim joist, and sheathing, and it must be framed to adequately distribute loads from the walls that bear on it to the foundation that supports it.

❓ What are the layers to the floor frame?

👉 You have the top layer that is your floor covering (Hardwood, Laminate, Vinyl, Carpet, etc.), next you have the underlayment (usually a thin layer of fiber, foam, rubber), below that you have your subfloor (plywood, OSB, concrete), and lastly you have the joists which are the foundation to your floors.

❓ What are different types of floor systems?

👉 So let's take a look at the most common types of flooring systems (or, more accurately, sub-flooring systems), the materials most commonly used and the types of flooring materials they can support....

  • Sub-floor systems. Concrete slabs. ...
  • Structural flooring layer. ...
  • Final floor surface.

❓ How are floors constructed?

👉 Floors may be built on beams or joists or use structures like prefabricated hollow core slabs. The subfloor builds on those and attaches by various means particular to the support structure, but the support and subfloor together always provides the strength of a floor one can sense underfoot.

❓ What are the 2 main methods of floor construction?

👉 Types of Floor Construction

  • Types of Floor Construction.
  • Composite metal deck slabs.
  • Precast slabs.
  • Concrete Flat Slab.
  • Timber/CLT Flooring.

❓ What are the types of floor?

👉

  • 7 Different Kinds of Floors and How to Clean Them. Did you know that the cost of flooring installation for a regular home can cost over $2000? ...
  • Concrete Floors. ...
  • Vinyl Floors. ...
  • Terrazzo Floors. ...
  • Linoleum Floors. ...
  • Ceramic Tile Floors. ...
  • Marble Floors. ...
  • Wood Floors.

❓ What are the different types of framing?

👉 Building framing is divided into two broad categories, heavy-frame construction (heavy framing) if the vertical supports are few and heavy such as in timber framing, pole building framing, or steel framing; or light-frame construction (light-framing) if the supports are more numerous and smaller, such as balloon, ...

❓ How do you frame a structure?

👉 0:5712:32All House Framing EXPLAINED...In Just 12 MINUTES ...

❓ What are the different methods of floor construction?

👉 Types of Floor Construction

  • Types of Floor Construction.
  • Composite metal deck slabs.
  • Precast slabs.
  • Concrete Flat Slab.
  • Timber/CLT Flooring.

👉 The studies also highlighted the importance of considering total building cost not just structural frame cost, as the choice of the structural frame and floor configuration will have associated impacts on many other elements, including the substructure, roof and external cladding .

👉 Here are common framing elements you will use in each part of the house: Joists: These are horizontal framing components that run the length of the floor. They make up the support for the floor of the home and the platform that the wall panels will attach to. Floor joists are covered with subflooring (usually made of plywood).

👉 How to Frame a Floor. The floors of most modern structures are built by arranging individual pieces of dimensional lumber in a consistent, repeating pattern. This process, commonly known as "stick framing," results in a structure that’s lightweight and economical, yet built to last.

👉 The floor structure distributes the load from the walls, upper storeys and roof straight to the building foundations. In the positions of planned load-bearing walls and partitions, the floor structure should be designed to avoid too much of a deflection.


Autor Des Artikels: Alexander Schulz. Unabhängiger Konstrukteur und technischer Experte. Arbeitserfahrung in der Baubranche seit 1980. Fachkompetenz in den Richtungen: Bau, Architektur, Design, Hausbau.

Video-Anleitung: Floor building – 3-d single-story conventional home framingesign.


Teilen Sie Mit Ihren Freunden
Kommentar Hinzufügen