Auto Body Side Moulding Fix


Auto Body Side Moulding Fix

Lösen Sie lose Seitenleiste - bevor sie wegbläst

Bringen Sie Gummi oder Vinyl-Seitenleiste an Ihrem Auto an, bevor es sich löst. Autotrimmung bei späten Modellautos ist berüchtigt dafür, sich abzuziehen - hier ist, wie man es wieder anbringt, bevor es auf der Autobahn landet.

Karosserieseitenfixierung

Bild 1: Alten Klebstoff vom Auto entfernen

Ein Baumwolllappen mit Klebstoffentferner tränken und den alten Klebstoff von der Tür entfernen. Tun Sie dies in einem gut belüfteten Bereich, vorzugsweise draußen auf der Auffahrt. Kratzen Sie den alten Kleber mit einem Plastikspachtel ab und setzen Sie den Entferner wieder ein und wischen Sie, bis der alte Kleber verschwunden ist. Reinigen Sie anschließend die Oberfläche mit denaturiertem Alkohol, um Rückstände zu entfernen. Verwenden Sie keine Schleifmittel. Was Sie wollen, ist eine glatte, makellose Oberfläche für das Montageband.

Foto 2: Reinigen Sie das Formteil

Reinigen Sie die Rückseite des Formteils gründlich, indem Sie es mit einem Klebstoffentferner sättigen und den alten Klebstoff wegreiben und abkratzen. Dies kann eine hartnäckige Arbeit sein, aber nehmen Sie sich Zeit und bleiben Sie dabei. Wenn die Oberfläche frei von Klebstoff ist, wischen Sie sie mit einem sauberen, mit denaturiertem Alkohol angefeuchteten Tuch ab.

Materialien

Klebstoffentferner und doppelseitiges Klebeband sind die einzigen Materialien, die Sie für diese Reparatur benötigen.

Bild 3: Formband auftragen

Das Doppelklebeband auf die Bereiche auftragen, die das Formteil berühren. Drücken Sie das Klebeband fest entlang der Länge. Verwenden Sie für eine breite Trimmung zwei Streifen wie gezeigt.

Foto 4: Die klebrige Oberfläche freilegen

Ziehen Sie den Schutzfilm vom Klebeband ab, um die klebrige Oberfläche freizulegen. Achten Sie darauf, es nicht mit den Fingern zu berühren oder Schmutz auf das Band zu bekommen.

Bild 5: Übernehmen Sie das Formteil

Setzen Sie das Formteil vorsichtig an einem Ende an und schieben Sie es langsam auf das Band. Das Band packt fest, also nehmen Sie sich Zeit. Sobald das Formteil an seinem Platz ist, drücken Sie es fest mit einem Lappen. Verwenden Sie eine Hin- und Herbewegung über das Formteil, um die gesamte Länge zu verbinden.

Vielleicht bist du einer von denen, die mit deinem Gummi- oder Vinyl-Seitenprofil im Wind flattern. Nun, für weniger als $ 20, können Sie dieses Problem ein für alle Mal beheben, bevor Ihre teure Formleiste in der Rückseite der Autobahn Cleanup Crew LKW landet. Im Autoteilehandel den Klebstoffentferner und das Formband aufnehmen. Dann brauchen Sie nur denaturierten Alkohol, ein Plastikspachtel und saubere Lumpen.

Erforderliche Werkzeuge für dieses Projekt

Lassen Sie sich die notwendigen Werkzeuge für dieses DIY-Projekt zusammenstellen, bevor Sie beginnen - Sie sparen Zeit und Frustration.

  • Lumpen
Sie benötigen auch ein Kunststoff-Spachtel

Erforderliche Materialien für dieses Projekt

Vermeiden Sie Last-Minute-Einkaufsfahrten, indem Sie alle Ihre Materialien im Voraus bereit haben. Hier ist eine Liste.

  • Klebstoffentferner
  • Doppelklebeband
Auto Body Side Moulding Fix

FAQ - 💬

❓ How do you fix side molding on a car?

👉 0:484:36How Do I Reattach Body Side Molding?Start of suggested clipEnd of suggested clipThis particular one you can use what we recommend 3m double-sided adhesive there's two differentMoreThis particular one you can use what we recommend 3m double-sided adhesive there's two different versions there's the thicker version. And then the stronger version.

❓ How do you get rid of body side molding?

👉 0:043:30How To Remove Glued Body Side Moldings Saving TimeStart of suggested clipEnd of suggested clipLet's start smooth and we're demonstrating how to use a heat inductor to remove the body sideMoreLet's start smooth and we're demonstrating how to use a heat inductor to remove the body side molding. Today in the video you can see that we're using the pad that goes with the heat inductor.

❓ What is the molding on the side of a car called?

👉 Bumper Guards & Bumper Molding Saves you money by protecting your car from scratches and dings.

❓ How do I get the trim to stick to my car?

👉 4:428:48How to Repair Automotive Trim.Start of suggested clipEnd of suggested clipAnd it's hard to get off so the trick that I use is to use toothpicks and that way you can controlMoreAnd it's hard to get off so the trick that I use is to use toothpicks and that way you can control where you're putting it you can make sure you get it a fine little line on there.

❓ How do you repair plastic car trim?

👉 2:013:42Repairing Broken Automotive Plastic Trim

❓ What is body side molding?

👉 What is Body Side Molding? Body side molding from Cowles can be considered a “protective accent.” It comes in the form of a strip with adhesive on one side and an attractive, uniform surface on the other.

❓ How do you remove side molding from a car door?

👉 0:064:22How to remove door molding on your car

❓ How do you remove glued down trim?

👉 Fill a small spray bottle with distilled white vinegar and spray the vinegar into the opened seam to loosen the wood glue. Work on a small section of wood trim at a time and allow the vinegar to work for 15 minutes before continuing.

❓ Are body side moldings worth it?

👉 Affordability. Preventing scratches, dings, and dents also prevents the costs that come along with getting your paint repaired and dents removed. There isn't much point in getting body side moldings if they were to cost more than it costs to repair your door if it were to get damaged.

❓ What is the plastic around a car called?

👉 Polyvinyl Chloride, more commonly known as PVC, is a flame retardant plastic that can be formed into either flexible or rigid components. PVC is another common plastic used in cars thanks to its formability and sleek finish: you'll often see PVC used for dashboards and automotive body parts.

❓ What is the best adhesive for car trim?

👉 Thomas' Top Picks for the Best Glue for Automotive Plastic

  • Best Plastic Glue for Automotives Overall: Amazing GOOP 160012 Automotive Adhesive | Buy Now.
  • Strongest Glue for Plastic Automotive Parts: Rhino Glue Gel, Heavy Duty 40 Gram Clear | Buy Now.
  • Best Urethane Adhesive: 3M Super Fast Plastic Repair | Buy Now.

❓ Can body side molding be used on a car?

👉 Universal Chrome Body Side Molding can be used on cars, trucks, SUV's and is also suitable for industrial and commercial applications. Install Instructions not available. 5/8 inch Beveled Body Side Molding - Chrome, 20 Ft or 50 Ft Rolls.

❓ What is a side body trim molding?

👉 Body Side Moldings provide protection for your doors and side body of your vehicle. Side trim moldings are universal and come in many sizes and profiles and most are a self-stick application. All of our trim moldings are suitable to apply to many surfaces, providing protection and decoration for automotive, industrial,...

❓ What are the best body side molding options?

👉 Suggested Models: Nissan Body Side Moldings for 370Z, Altima, Armada, Leaf, Maxima, Rogue, Sentra, and Versa Body Side Molding. Suggested Infiniti Models: Infiniti Body Side Moldings for Q50, Q60, Q70, QX30, and QX60 Body Side Molding. Install Instructions not available. 1 inch Toyota Factory Style Body Side Molding w/ Pointed Ends in Colors.

❓ How do you fix a loose body side trim on a car?

👉 Reattach rubber or vinyl body side molding on your car before it comes loose. Auto trim on late model cars is notorious for peeling off—here's how to reattach it before it ends up on the highway. Saturate a cotton rag with adhesive remover and clean the old adhesive off the door.


Autor Des Artikels: Alexander Schulz. Unabhängiger Konstrukteur und technischer Experte. Arbeitserfahrung in der Baubranche seit 1980. Fachkompetenz in den Richtungen: Bau, Architektur, Design, Hausbau.

Video-Anleitung: HOW TO REATTACH LOOSE BODY MOLDINGS.


Teilen Sie Mit Ihren Freunden
Kommentar Hinzufügen